Centrifugal
Ventilating Fans ABL-BI, ABL-AF:
Description: AMCA Class I, II and III centrifugal fans with Backward Inclined (BI) or double thickness Airfoil (AF) wheels mounted in an aerodynamic housing. Limit-load horsepower and stable characteristics.
Typical Applications: Ventilation supply for buildings, tunnels, motors, etc. Combustion or process air supply. Exhaust air from buildings, tunnels, industrial processes and equipment.
Plenum Fans:
Description: Centrifugal unhoused fan with either Backward Inclined (BI), Backward Curved single thickness airfoil (BC) or double thickness Airfoil (AF) wheels.
Typical Applications: Plenum pressuration in air handling and heating and air conditioning units. Cooling air for packaged air compressors.
Cast Iron Housed Vent Sets; Baby Vent Set:
Description: Forward curved blade centrifugal fan complete with drive. Moderate efficiency for low-pressure applications.
Typical Applications: Ventilation of small spaces and equipment.
Cast-Iron Low Pressure Exhausters, Type V Volume Fans:
Description: Radial blade centrifugal fans.
Typical Applications: Supply air for conveying systems, dryers, forges, etc. Exhaust air from grinding and buffing machines, pickling tanks, etc.
Industrial Exhausters, Types AW, MW, PW, OW and HW:
Description: Centrifugal fans with air wheel (AW), material wheel (MW), open wheel (OW), paddle wheel (PW) or high-pressure wheel (HW).
Typical Applications: Supply air for conveying systems, dryers, etc. Exhaust air from grinding and buffing machines, pickling tanks, textile machines, etc.
Cast-Iron and Steel Plate Medium Pressure Blowers/E Blowers and RE Blowers:
Description: Radial blade centrifugal fans. Various designs.
Typical Applications: Low-flow rate and high pressure. Supply air for oil burners, gas burners, over-fire airjets, conveying systems, etc. Exhaust air from grinding and buffing machines, pickling tanks, etc. Boost gas pressure, inflate fabric structures, etc. Chemical processes.
Centrifugal Ventilating Fans; BL, ACL-BC:
Description: AMCA Class I, II, III and IV centrifugal fans with Backward Curved (BC wheels mounted in a robust aerodynamic housing. Stationary inlet vanes provide stable air characteristics on installations with less than-ideal inlet conditions.
Typical Applications: Ventilation supply for buildings, tunnels, motors, etc. Combustion or process air supply. Exhaust air from buildings, tunnels, industrial processes and equipment.
Pressure Blowers; CB and Type R:
Description: Radial blade centrifugal fans. Type R's are custom designed.
Typical Applications: Supply air for process cooling, drying, conveying and combustion systems. Exhaust gases from process cooling, drying, conveying and combustion system. Boost gas pressure, inflate fabric structures, etc.
Heavy-Duty Backward Curved and Backward Inclined Centrifugal Fans/ L-Series, D-Series and MP-Series:
Description: Backward Curved or Backwared Inclined blades; single thickness for high efficiency. Limit-load horsepower characteristic. Sharp rising, stable pressure curve throughout entire range.
Typical Applications: Supply air for combustion (forced draft) and other high-pressure industrial uses. Exhaust products of combustion (induced draft) and other industrial gases.
Heavy-Duty Radial-Blade Centrifugal Fans; H-Series, RG Series and RT-Series:
Description: Straight radial forward curved or radial tip, self-cleaning characteristics. Stable, sharply rising pressure curve. Moderate efficiency.
Typical Applications: Exhaust products of combustion (induced draft) or other industrial gases including those of an erosive chacter such as from cement or lime kilns, sinter or pelletizing plants and basic owygen furnaces. Handling of high-temperatuer gases such as gas-recirculation duty.
Heavy-Duty Airfoil Blade Centifugal Fans; A Series, BA-Series, Z-Series and TVAF Series:
Description: Backward Curved blades of airfoil cross section for highest efficiency. Limit-load horsepower characteristics. Stable pressure curve throughout entire range.
Typical Applications: Supply air for combustion (forced draft) and for industrial uses. Exhaust products of combustion (induced draft) and other industrial gases.
|
|
|
|
P.O. Box 890 - Twin Peaks, CA 92391- 0890 Phone: 800-937-8099 - Fax: 909-337-2897 |